ELECTRIC FENCE CATALOG

Product Features and Specifications

ENERGIZER: DRUID 15LCD (E-DRUID/15/LCD)

Electric Fence Energizer Single Zone (made in South Africa)

PRODUCT DETAILS

▸ 4.6 Joule output energy (single zone)
▸ Robust and flexible design for home and commercial security
▸ Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
▸ Connectable to armed response radio or GSM module
▸ Easy-to-use tag included for controlling the energizer
▸ Powered by 240V mains and includes built-in battery for back-up power
▸ Built-in gate alarm input to monitor if the gate is open or closed

SPECIFICATIONS

Enclosure size: L285 x W212 x D120
Weight excluding battery (7AH): 3.1kg
Weight including battery (7AH): 5.3kg IP rating: IPx4
Operating temperatures: -10°C to 50°C
Operating humidity: less than 80% non-condensing
Electrical supply voltage: 240V
Typical power consumption (normal operating conditions): 18VA Standby time: 5hrs
Energy output 500 Ohms load: 4.6 Joule Open circuit voltage: 9000V

KEYPAD: DRUID ONE ZONE KEYPAD (EE-DR.LCD/KP)

Electric Fence Keypad for Single Zone DRUID 15LCD

PRODUCT DETAILS

▸ Up to two keypads can be connected to one energizer
▸ The fence voltage outputs can be adjusted using the keypad
▸ The siren and gate outputs can be bypassed using the keypad

SPECIFICATIONS

Size: L130mm X 105mm X H30mm Weight: 180grams
Supply: 12V (from the energizer)

ENERGIZER: DRUID 25LCD / DRUID 28LCD (DRUID/28/LCD)

Electric Fence Energizer Two Zones or Multi Zones (made in South Africa)

PRODUCT DETAILS

▸ Two 2.4 / Two 3.7 Joule independently monitored and controlled zones (Two zones)
▸ Robust and flexible design is ideal for commercial, industrial and high-security sites
▸ Each zone can be set independently to be on/off or in high/low voltage modes
▸ Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
▸ Connectable to armed response radio or GSM module
▸ Powered by 240V mains and includes built-in battery for back-up power
▸ Built-in gate alarm input to monitor if the gate is open or closed
▸ The relay expansion card for energizer inputs and outputs GPIO

SPECIFICATIONS

Enclosure size: L400mm x W270mm x D125mm Weight excluding battery: (7AH) 5.7kg
Weight including battery: (7AH) 8.0kg
IP rating: IPx4
Operating temperatures: -10°C to 50°C
Operating humidity: less than 80% non-condensing
Electrical supply voltage: 240V
Typical power consumption (normal operating conditions): 18VA Internal battery 7AH Standby time: 5hrs
High-voltage output Energy (500 Ohms load): 3.7 Joule per zone Open circuit voltage: 9 000V

KEYPAD: DRUID TWO ZONE KEYPAD (EE-DR.LCD/KP/2Z)

Electric Fence Keypad for Single Zone DRUID 15LCD – EE-DR-LCD-KP (made in South Africa)

PRODUCT DETAILS

▸ Up to two keypads can be connected to one energizer
▸ The fence voltage outputs can be adjusted using the keypad
▸ The siren and gate outputs can be bypassed using the keypad

SPECIFICATIONS

Size: L130mm X 105mm X H30mm Weight: 180grams
Supply: 12V (from the energiser)

Get Your Quote Now

ENERGIZER: JVA Z14 LCD (Z14) / JVA Z14 LCD (Z24)

Electric Fence Energizer Single Zone / Two Zones (made in South Africa)

PRODUCT DETAILS

▸ 4.0 Joule output energy (single zone) / 2 x 4.0 Joule output energy (two zones)
▸ Robust and flexible design for home and commercial security
▸ High and low power modes, supports Bi-Polar or conventional fence wiring
▸ Alarms on fence short or open circuit
▸ Control and programming via LCD keypad
▸ 2 control inputs, 2 switched 12V DC outputs (Siren and Strobe)
▸ Connectable to armed response radio or GSM module
▸ Built in charger and space for a 12V 7.2aH backup battery
▸ Built-in gate alarm input to monitor if the gate is open or closed

SPECIFICATIONS

Enclosure size: L303 x W223 x D122
Weight excluding battery (7AH): 1.9kg
Weight including battery (7AH): 4.0kg
Electrical supply voltage: 240V
Typical power consumption: 18VA Standby time: 5hrs
Energy output 500 Ohms load: 4.0 Joule
Open circuit voltage: 9 000V

1 2

KEYPAD: JVA Z14 LCD (JPTE0240)

Electric Fence Keypad for Single Zone, Two Zones and Multi Zones

PRODUCT DETAILS

▸ Up to two keypads can be connected to one energizer
▸ The fence voltage outputs can be adjusted using the keypad
▸ The siren and gate outputs can be bypassed using the keypad

Get Your Quote Now

TOUCH SCREEN MODULE: DRUID CONTROLLER FG7C

The Nemtek Druid controller FG7C is a seven-inch LCD touch-screen controller that can be used to control up to 32 Nemtek Druid two-zone energizers . The Nemtek electric-fencing system can also be integrated via a TCP/IP connection between the Nemtek FG7C capacitive touch-screen controller and Nemtek fenceprobe software or a third-party security management system

PRODUCT DETAILS

▸ Up to 32 Druid two-zone energizers providing up to 64 zones can be controlled
▸ Graphic image of the site with zones and the fence and energizer conditions can be displayed
▸ Commands can be sent to the energizers using the touchpad
▸ Logs containing system details are recorded
▸ Allows for three different types of users with different access levels to be set up
▸ Can be configured to allow TCP/IP connectivity for integration with third-party software
▸ For large-scale systems, additional FG7C controllers can be used

SPECIFICATIONS

Enclosure size wall mount H140mm x W200mm x D35mm
Weight 450g
Operating temperatures -10°C – 55°C
Operating humidity 10% – 90% (non-condensing)
Mains supply voltage 10 – 15Vdc
Current consumption 450mA with the LCD display on

NETWORK MODULE: DRUID NEMLINK CARD (EE-LCD2X/NLE)

The Nemlink cards provide a convenient ethernet interface for the Druid two-zone energizers and the Druid FG controller to be distributed over standard TCP/IP ethernet networks

PRODUCT DETAILS

▸ Compatible with the Druid two-zone energizers and Druid FG7 controller
▸ Fits inside the Druid two-zone energizer enclosure
▸ Provides electrical isolation between devices on the network
▸ Enables the use of existing IP Network infrastructure, saving wiring time and costs

SPECIFICATIONS

Size: L140mm x W55mm x H20mm
Weight: 45g
Power supply:10V – 15V DC
Current consumption: 80mA
Connector: RJ45

RELAY MODULE: DRUID 10 RELAY EXPANSION CARD (EE-LCD2X/REL)

The Druid 10 relay expansion card can be used to increase the number of information inputs and outputs from the Druid 25 LCD or Druid 28 LCD energizers. It can be installed in the energizer housing. It has four inputs which can be used to switch the individual zones on/off and to switch between high and low voltage for each zone

PRODUCT DETAILS

▸ 4 digital inputs, 10 relay outputs
▸ 3 Programmed setting to choose from
▸ All relays can be individually configured to be independent dry contacts or common-ground wet contacts with 12V nominal output
▸ Robust surge protection is included on all inputs and outputs

SPECIFICATIONS

Size: L180mm x W112mm x H22mm
Weight: ~260g
Power supply: 10V – 15V DC

SYSTEM MODULE: DRUID NETWORK IO CARD (EE-FGIO8/NL)

The IO card is typically used as an interface between a network containing an FG, Druid 25 LCD or Druid 28 LCD energizer, and third-party systems, but is a general input-output device.

PRODUCT DETAILS

▸ 8 digital inputs, 8 plus 1 relay outputs (8 user relays + 1 valid comms relay)
▸ Robust surge protection is included on all inputs and outputs
▸ All relays can be individually configured to be independent dry contacts or common-ground wet contacts with 12V nominal output
▸ Each relay has a very useful LED indicator to show if the relay is energized
▸ 3 communications debug LED indicators for TX, RX and VALID COMMAND
▸ 1 power-on LED indicator
▸ In addition to the input states, the IO card also reports back temperature and supply voltagelevel
▸ Up to 31 unique addresses can be set using on-card jumpers
▸ Available with ethernet (EE-FGIO8/NL) or RS485 (EE-FGIO8/485) interface options

SPECIFICATIONS

Size: L180mm x W112mm x H22mm
Weight: ~250g
Power supply: 10V – 15V DC

SYSTEM MODULE: DRUID SYNCHRONISATION MODULE (EE-LCD2X/GPSYNC)

Nemtek synchronisation module synchronises the energizers using satellites

PRODUCT DETAILS

▸ Easy to install and ready to use
▸ Watertight housing for external installation

SPECIFICATIONS

Weight: 105g
Power supply:10V – 15V DC
Current consumption: 50mA
IP rating: IP65

Get Your Quote Now

SYSTEM MODULE: GSM MODULE (GSV)

Universal GSM module communicator mobile APP for IOS & Android

PRODUCT DETAILS

▸ Control and monitoring up to 8 users phone number
▸ View event logs on APP / SMS
▸ SMS or Call-In to turn ON / OFF Electric Fence Energizer
▸ Receive event status notification on mobile phone.
▸ * SIM card telco subscription by user

SPECIFICATIONS

Size: W120mm x H64mm
Weight: 45g
Power supply: 9V – 14V DC
Current consumption: 40mA

Get Your Quote Now

SYSTEM MODULE: DOUBLE POLE LIGHTING DIVERTER PROTECTION (EA-LIDII)

Double pole lightning protection system inhibits lightning and diverts the voltage spikes caused by lightning. Can protect the output and also the return of a security energizer

PRODUCT DETAILS

▸ Built-in lightning inhibitor, inhibits lightning from getting to the energizer.
▸ Built-in lightning diverter, diverts the lightning from the energizer into the earth spikes
▸ External cover and stainless steel components for use outdoors near the fence

SPECIFICATIONS

Material: UV stabilised plastic housing
Stainless steel components for long life

SYSTEM ACCESSORIES: SLIDING GATE CONTACT (EA-SGC07)

Nemtek heavy duty sliding gate contact is used for series wiring of sliding gates

PRODUCT DETAILS

▸ robust construction using stainless steel and brass, making it suitable for outdoor use in most climates
▸ Watertight housing for external installation

SPECIFICATIONS

Material: UV stabilised Nylon
Stainless steel and brass
Comes in two parts:
Dimensions in mm: 80(L) x 118(W) x 60(H)

ACCESSORIES: FENCE LIGHT (SR-FL/TL/G)

The intensity of the light remains the same so it can be seen from far irrespective of the fence voltage. It is installed between the earth and live wire to indicate the status and condition of the fence for peace of mind

PRODUCT DETAILS

▸ Indicates power on the fence for peace of mind
▸ Visible from up to 1km at night and 100m during the day
▸ No batteries required
▸ Uses minimal power from the fence
▸ Highly visible LEDs allow the light to shine into the secure area only • Can operate from 0.9kV to 12kV

SPECIFICATIONS

Steel wire connectors: Galvanised (Brown housing) or stainless steel (Blue housing) option
Material: Plastic and water tight compound
Waterproof Housing IP66
Flashing rates:
1. Flashing normally rate over ~7.5kV
2. Flashing at 25% slower than normal between 7.5kV~3kV
3. Flashing at 50% slower than normal between 3kV~2.5kV
4. Flashing at 75% slower than normal when less than ~2.5kV

ACCESSORIES: METAL BOX SIREN STROBE (SRS)

Metal Siren Box and Strobe Light

PRODUCT DETAILS

▸ The sirens are audible indicators that alerts you if there is an alarm condition
▸ Strobe Siren Signal Warning Light Flash LED Lamp
▸ Designed to be weather resistant for indoor and outdoor use

SPECIFICATIONS

Metal bos dimensions: L140mm x W55mm x H20mm
Power supply:12V DC
Siren power output : 20W
Siren rated current: 330mA
Strobe light rated current: 120mA

Get Your Quote Now

ACCESSORIES: WARNING SIGNAGE (WS-EF)

Warning signs must be placed along the fence line to warn off the existence of an electrified fence. These must be placed at 10m intervals along the fence, at gate ways or whenever there is a change of direction. Wire clips on the warning sign reduce installation time

PRODUCT DETAILS

▸ IEC 60335-2-76 compliant design

SPECIFICATIONS

IEC 60335-2-76 compliant design
Material: UV protected for long life

ACCESSORIES: ENCLOSURE POWDER COATED METAL (CVS-642)

A powder coated metal enclosure which is ideal for housing energisers and accessories. It is weatherproof and can be used outdoors

PRODUCT DETAILS

▸ Inspection window for viewing without opening the door
▸ Wooden electrically isolated backing plate for mounting the energizers and accessories
▸ Available in different sizes

SPECIFICATIONS

Material: Powder coated metal boxIP65
H600x W400 x D200

Get Your Quote Now

CABLE: HT CABLE ALUMINIUM (EH-AS100)

The A-Series high voltage electric fencing insulated cable is used as a lead out cable from your energizer to the fence and for all other insulated high voltage transmissions

PRODUCT DETAILS

▸ Ideal cable when aluminium wire is used
▸ Low electrical resistance reducing power and voltage drops over large distances

SPECIFICATIONS

Material: UV stabilised double insulated cable
Aluminium alloy inner conductor

CABLE: HT CABLE ALUMINIUM UNDERGROUND (AH-UC1.6/100)

This U-Series underground cable is used to carry the electricity from the energizer to the electric fence in a safe and insulated manner

PRODUCT DETAILS

▸ Heavy duty design for harsh environments
▸ 1.6 mm diameter inner conductor wire for shorter cable runs

SPECIFICATIONS

Solid heavy inner wire conductor, 1.6 mm wire (98 Ohms/km)
Double insulated UV stabilised outer and inner sheaths

CABLE: HT CABLE SLIMLINE (EH-BS100S)

The S-Series high voltage cable is used as a lead out cable for swing gate

PRODUCT DETAILS

▸ Tinned copper stranded wires for more flexible and ease of use

SPECIFICATIONS

UV stabilised double insulated
Tinned copper stranded wires

Get Your Quote Now

FENCE POST: SQUARE TUBE BRACKET POST (SQ8-HDG) / (SQ8-SS)

The level of security achieved is directly affected by the choice of bracket, the number of wires forming the electrical barrier and the distance between the brackets. Brackets are made from steel and are finished in a high quality outdoor hot-dip galvanised or for stainless steel coastal conditions

PRODUCT DETAILS

▸ Straight and angled
▸ Multiple wire options; 6 wire (995 mm), 8 wire (1195 mm) or 10 wire (1395 mm) long
▸ Hot dip galvanised or Stainless Steel 304
▸ Associate with insulator

SPECIFICATIONS

Hot dip galvanised
Material: 20mm X 20mm X1.6mm (thickness) Material: 25mm X 25mm X1.9mm (thickness)
Stainless steel 304
Material: 20mm X 20mm X1.0mm (thickness) Material: 25mm X 25mm X1.0mm (thickness)